Skip to main content
Editing Step 59 —

Step Type:

Drag to rearrange

Your HE280 Hotend is assembled and ready to print.

Please be sure NOT to lose the remaining plug that you have from the 25mm fan. You will be using this later in the build for the 40mm ball bearing fan that cools the RAMBo boards drivers.

If you have a REV6 accelerometer board, you didn't cut the fan lead of in this guide. Don't worry we though ahead and packed a fan lead in your RAMBo kit. You will find that later when you get to that step.

Your contributions are licensed under the open source Creative Commons license.