Skip to main content
Editing Step 26 —

Step Type:

Drag to rearrange

Be careful with the Thermistor, it is a fragile component, if handled too rough it will break.

Due to their fragile nature, for orders shipped after 9/27/16, we have included a spare thermistor in your HE280 Hotend kit.

Locate the Thermistor 100K (26141) and 100mm long Small PTFE Tube (26190)

Cut the 100mm long small PTFE tube in half. You will now have two pieces that are 50mm long each.

Carefully slide one 50mm tube up one leg of the thermistor, then repeat for the other leg. The tubing should reach up to the glass bead on the thermistor. Do not force the tubes as this may split the thermistor head.

Your contributions are licensed under the open source Creative Commons license.