Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 21 —

Step Type:

Drag to rearrange

Use a pair of pliers to crimp the ferrule to the leads. Do this in three steps: roughly locate the midpoint of the ferrule and crimp the upper portion (side with the thermal safety fuse lead), then the lower side (side with the heater cartridge lead), and finally crimp, one last time in the center of the ferrule.

Do this carefully. It does not take much force. You WILL damage the insulation if you squeeze too hard.

Your contributions are licensed under the open source Creative Commons license.