Editing Step 43 —

Step Type:

Drag to rearrange

Locate the remaining (3) 25mm Ball Bearing Fans (26309) and HE280 Layer Fan Mounts (71259).

Insert (1) fan into each fan mount as show in the image.

Pay close attention to the orientation of the fan leads and direction of installation.

The fans should be installed into the fan mounts in the direction indicated by red arrows in the image.

The fan should be oriented so that the leads that exit the fan are located where there is not an alignment pin. This is indicated in the image by an orange arrow, the alignment pins are indicated with blue arrow.

Your contributions are licensed under the open source Creative Commons license.