Step Type:

Drag to rearrange

To prepare the heat shrink tubing (84431), one side needs to be stretched enough to fit over the end of the Pluggable 8 position Push-In Wire Terminal Plug End (26217)

The easiest way to do this is to use a pair of pliers (fully closed) inserted half way into the heat shrink,

When performing this step, be sure to not to over-stretch the heat shrink tubing causing rips or tears.

Proceed to slowly open the pliers to stretch the heat shrink.

This process may require stretching a shorter section, inserting the pliers further, and then stretching that section.

Test fit the heat shrink tubing over the end of the Pluggable 8 position Push-In Wire Terminal Plug End. You can see in the pic, the proper depth to have the plug inserted into the heat shrink.

Your contributions are licensed under the open source Creative Commons license.