Skip to main content
Editing Step 46 —

Step Type:

Drag to rearrange

NOTE: If you purchased a machine after 8/22/2018 you will not need to install the 5A or 15A fuses. Your kit may not come with them, and will come with a blank side panel instead. The fuses are now built in to the Duet board. If this is the case, skip this step, we'll revisit this later in Step 50.

At this stage, pass the red 20awg wire from the hotend whip and the black 12awg wire from the Y tower through the frame panel between the Y and Z towers. We will return to this in a few steps.

Your contributions are licensed under the open source Creative Commons license.