Skip to main content
Editing Step 25 —

Step Type:

Drag to rearrange

You will need to assemble the three carriages for this step. Please open this link to the guide in a new window, and return here when you're finished: Carriage Assembly

We will now install the injection molded carriages on the three towers. They will install on the towers with the ball joints facing the inside.

To install the carriages pass the wires from the top of the TSLOT through the center of the carriage.

Pushing the carriage down too hard too fast can damage the bearing covers on the carriages. Please perform this operation slowly and carefully.

Lower the carriage down to the top of the TSLOT and then slowly push it down onto the TSLOT.

Your contributions are licensed under the open source Creative Commons license.