Skip to main content
Editing Step 24 —

Step Type:

Drag to rearrange

Locate the yellow ring terminals

You will crimp a yellow ring terminal on the red 12awg wire from the Z tower, and the black 12awg wire from the X tower.

These two wires should then be routed through the base to the power supply.

They will connect to vacant V+ (red wire) and the V- (black wire) terminals on the power supply using the screws provided with the power supply.

Locate the shorter length of 12awg red wire from your kit. Crimp the final yellow ring terminal on one end of this wire. It will connect to the V+ location indicated in the photo on the power supply.

Your contributions are licensed under the open source Creative Commons license.