Step Type:

Drag to rearrange

Align the top assembly top plate with the top of the printer. Work your way around the periphery of the top plate while pressing it down onto each set of injection molded tabs. This is a process of finesse, not brute strength. When complete, the top plate should be resting flush against the injection molded parts in the area of each axis.

When the plate is set on all tabs you will install 6-32 x 1" screws in all 12 locations. You can fully tighten these screws.

Install the top electronics cover when you have completed.

Your contributions are licensed under the open source Creative Commons license.