Editing Step 30 —
Installing the Heated Bed

Step Type:

Drag to rearrange

Align the heated bed with the with the bed insulator. There is a pocket for the thermistor on the insulator and there are 3 dimples (align with holes in the periphery of the heated bed) that will help you align the bed with the insulator.

Carefully set the insulator and bed into the base assembly of the printer.

The rib features on the insulator will straddle the boss features of the bed clamps (attached to the base top plate.

Ensure the bed can set down against the insulator. Gently pull any wires into the base if they are interfering with the bed sitting flush.

Your contributions are licensed under the open source Creative Commons license.