Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 31 —

Step Type:

Drag to rearrange

When handling the glass plate please do so carefully. Take extra care not to touch the top surface of the glass. Oils from your hands can prevent filament from sticking to the glass.

Install the glass plate on top of the heated bed.

Rotate the blue bed clamps so they are clamping the glass against the heated bed. Loosen/Tighten the screws as needed if required. You do not want the clamps to be so tight that they are impossible to rotate. You also don't want them so loose that the glass has the ability to move around.

Your contributions are licensed under the open source Creative Commons license.