Editing Step 27 —

Step Type:

Drag to rearrange

Locate and install the ribbon cables on the LCD. If they are not already labeled do so now (to match the image)

Connect the ribbon cables to the RAMBo Board in the orientation and location specified.

The LCD is labeled on the back EXP1 & EXP2. EXP1 = A & EXP2 = B On the LCD adapter board, the top of the adapter should be labeled by you as A and the bottom should be labeled as B

Note the pink stripe on the ribbon cable... this should be on the left hand side when plugged into the LCD adapter board. The connection is keyed on the LCD itself so the orientation will be correct.

Your contributions are licensed under the open source Creative Commons license.