Skip to main content
Editing Step 16 —

Step Type:

Drag to rearrange

With the Bowden (PTFE) Tube pressed down, you will now lift up on the black ring in the top of the hot end.

Insert the PTC Lanyard onto the black ring in the top of the hotend. This will secure the Bowden (PTFE) Tube and prevent it from being able to work its way out of the hot end.

It is critical that the PTFE is fully seated in the hotend. If it is not it can result in the hot end jamming.

Your contributions are licensed under the open source Creative Commons license.