Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 15 —

Step Type:

Drag to rearrange

Slide one of the Lanyward PTC Clips onto the Bowden (PTFE) Tube.

Insert the Bowden (PTFE) Tube into the top of the hot end. Press the tube down until you feel it seat in the bottom of the hot end. Press the hot end effector down so the nozzle is against the glass plate and give the Bowden (PTFE) Tube one more good push to ensure that it is seated fully.

Your contributions are licensed under the open source Creative Commons license.