There are 3 wires that will connector to the top left corner of the RAMBo output terminals. These wires are the 18awg red, 18awg black, and 26awg orange.
There are (2) red wires, and (2) black wires in the hot end whip. The 18awg wires are the THICKER wires.
Ensure that the screw terminals on the RAMBo are loose before inserting any wires.
Insert the black 18awg wire into the Heat 0 negative location
Insert the red 18awg wire into the Heat 0 positive location
Insert the orange 26awg wire into the Fan 0 negative location
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.