Help

Step Type:

Drag to rearrange

You will now lift the tower and slowly slide it into the upper assembly. The tower assembly will clear the limit switch. As you are sliding it into place you will need to ensure that the wires stay down in their relief, otherwise they will get pinched when tightening the plate.

Make sure to look from the outside of the tower towards the center of the upper assembly and ensure that the wires are ALL in their relief.

Secure the tower in place by reinstalling the 1/4-20 x 1" long button head screws, split ring washer, and flat washer stacked the same as you removed them.

Your contributions are licensed under the open source Creative Commons license.