Moving back to the machine, we will now work on the whip to alter the power plug shown in Pic 1.
Locate the white 2 pin power plug and cut off the plug to remove it. Cut the wires as close to the white plug as possible to give you the most wire to work with as shown in Pic 2.
Strip off a few millimeters of the covering of the wire as shown in Pic 3.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.