Be certain your machine is not plugged in to power before continuing!
Strip 1/4" off the white and black wires included in the kit, and crimp one ring terminal to one end of the white wire, and one ring terminal to each end of the black wire.
Attach the white to N and black to L on the power supply, as shown in the photo.
Note: It's recommended to turn the existing red ring terminals upside down when installing them both on the same screw, as shown in the photo.
Attach the other end of the black wire to the SSR terminal number 1.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.