Skip to main content
Editing Step 5 —

Step Type:

Drag to rearrange

Remove the clear plastic cover from the 26193 SSR

Place the SSR in the machine as shown

Mark and drill the mounting holes using the 4mm (5/32") drill

Position the AC output side of the SSR near the Y tower

Use the two 30117 6-32 x 5/8"L Phillip Pan head - SS and two 30164 6-32 Nylon Lock Nut - SS to secure the SSR in place

During this step would be a good time to vacuum or blow out the sawdust from your machine.

Your contributions are licensed under the open source Creative Commons license.