SeeMeCNC settings and slicing profiles are currently aligned to work properly with version 3.5.1. Make sure you download this version as this is what the guide is written for!
Problems have been reported with dual feeding and Cura 3.6.x version and newer.
Also note we DO NOT recommend printing over USB. Upload to the printer or use an SD card on the control screen if you purchased a control screen option.
Cura can be downloaded here: Cura
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.