Skip to main content
Editing Step 23 —

Step Type:

Drag to rearrange

Locate three #4 1/2" screws (the longest ones in the kit) as shown in Pic 1.

Line up the plugs on the platform and pushing the PCB onto the platform, the plugs should go into the holes they line up with.

Attach the PCB to the platform using the #4, 1/2" screws at all 3 corners.

Your hotend assembly is finished and you have a fully asssmbled SE300 Hotend! Congratulations!

Your contributions are licensed under the open source Creative Commons license.