Skip to main content

Step Type:

Drag to rearrange

The newer style of spring arms use two identical arms and two screws for assembly.

Press the bearings on to the post of either spring arm, as shown in the second photo.

Use the supplied 30249 #4 x 1/2" Philips Pan Head sheet metal screws in both sides of the spring arms to secure the bearings in place. Make sure there's no gap and the two halves are fully seated and screwed together.

Repeat for all three spring arm assemblies.

The remaining steps in this guide show photos of the older style of spring arm, but the orientation and installation is identical between the two styles. You can follow the rest of this guide normally.

Your contributions are licensed under the open source Creative Commons license.