Skip to main content
Editing Step 5 —

Step Type:

Drag to rearrange

Insert the knob back onto the Rotary Encoder.

Install the Ribbon cables in the connectors on the back of the LCD Controller. These connections are Keyed.

The connectors on the back of the LCD Controller are labeled EXP 1 & EXP 2. Label EXP 1 with an A and label EXP 2 with a B. Then label both the ends of the Ribbon Cables with A & B.

Remove the SD Card from the packaging. Insert the Micro SD card into the SD Card Adapter. Insert the SD card into the SD Card Reader in the LCD Controller.

The text on the SD card will face the back of the LCD Controller

Your contributions are licensed under the open source Creative Commons license.