Changes to Rostock Max v3 RTP User Guide Introduction

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged
Category
Rostock Max v3
Type
how-to
Title
Rostock Max v3 Factory Assembled Getting Started
Introduction
Congrats on your new Factory Assembled Rostock Max v3 This guide will help you in getting started with your new machine.
Your machine was fully assembled, calibrated and printed successfully before it left our factory.
Please make sure there are no damages to your new Rostock Max v2. Inspect it carefully for any broken parts. If you find any damages please STOP and contact the company that you purchased it from immediately. Please include your order number when contacting them as it helps to speed up the process.
Your machine was fully assembled, calibrated and printed successfully before it left our factory. We have done some things to make sure the machine does not get damaged while shipping the printer. Please complete the following steps:
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Author
SeeMeCNC
Public
No
Ogdc Enabled
inherit

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After
stepid 308 stepid 308
Step #: 2
Before
After
stepid 309 stepid 309
Step #: 3
Before
After
stepid 310 stepid 310
Step #: 4
Before
After
stepid 311 stepid 311