Changes to Max Hax #1: Hot End Quick Disconnect Introduction

Edit by geneb —

Edit approved by geneb

Before
After
Unchanged
Category
Machine Upgrades
Type
how-to
Title
Max Hax #1: Hot End Quick Disconnect
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Author
geneb
Public
No
Summary
Do you want to be able to change out hot ends quickly and easily? Then Max Hax #1 is for you!
Ogdc Enabled
inherit

Tools

  • #1 Phillips Screwdriver x1 added.
  • Crimping Tool x1 added.
  • Wire Cutters x1 added.

Parts

  • #6-32 x 3/8" Pan Head Screw x3 Can be purchased at any local hardware store. added.
  • #6-32 x 1" F-F Threaded Spacer. x3 Can be purchased at any local hardware store. added.
  • #6-32 x 1/2" Thumbscrew x3 Can be purchased at any local hardware store. added.
  • Female JST Connector & Sockets x2 added.
  • Male JST Connector & Pins x2 added.
  • 1x4 Female Latching Connector & Socket x1 added.
  • 1x4 Male Latching Connector & Pins x1 added.

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After
stepid 131 stepid 131