Difficulty
Moderate
Steps
2
Time Required
- RAMBo Setting Z height 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
We will first determine if the full Z height needs resetting.
-
On the LCD, click the knob and scroll down to the last menu Item for Advanced settings and click the knob. See Pic 1.
-
Scroll all the way down to Calibrate Z Height and click the knob. See Pic 2.
-
Click Home Towers. See pic 3. If the machine homes to the top of the machine properly, Skip to Step 3.
-
If the machine only moves down a little bit and stops, or moves down, continue to step 2.
-
-
-
If when you attempted to home the machine, the machine only moved down a bit, you will first want to shut the machine off for 30 seconds and turn it back on to reset it.
-
With the machine back on, manually raise the carriages to the top of the machine so the carriages are near the home position. See pic 1.
-
Click the knob on the LCD and go back to Advanced menu and click the knob. Then scroll to Calibrate Z Height and click the knob.
-
On this menu go directly to Z Position and click the knob. See Pic 2.
-
Now scroll the knob to lower the carriages down to bring the nozzle closer to the bed.
-
When the nozzle is close to the bed, click the knob and go to Set new Z=0.00 and click the knob. The LCD should beep. See Pic 3.
-
Now scroll to Home towers and the machine should now be able to home to the top of the machine properly. You can now move to the next step.
-
