Difficulty
Moderate
Steps
3
Time Required
- Preparing for the Build 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
When you receive your Droplit v2 it will come in a single box with all of the machine components inside.
-
Upon opening the box you will find packaging material to protect the parts. Remove this packaging material.
-
At the top of the box will be the Acrylic Panels, and laser cut melamine. Remove these items from the box.
-
Next you will find another smaller box. This contains the hardware packs and miscellaneous components for building the kit.
-
Do a quick inventory of the parts. Each section of the builds hardware is packaged separately. You will find packing list for each sub-section in their respective bag of hardware.
-
NOTE: The Electronics Parts and Hardware pack have some larger components that have been placed loosely in the box.
-
-
-
The Melamine parts are covered with a special cutting mask that prevents the laser cutting operation from depositing cutting byproducts on the Melamine surface.
-
You have two basic options:
-
Remove all the masking from all the parts now.
-
Remove the masking from the parts as they are used in the build.
-
-
-
Locate the #10-32, 5/8” Socket Head Cap Screw in the Hardware Pack 78890.
-
We're going to use this to cut threads into 4 of the melamine plates. These threaded holes will be used later with nylon thumbscrews to hold the mirror mount, mirror, and VAT. You'll need a 5/32” Allen wrench to drive the screw in, or you can use an electric drill (depending on your level of skill / confidence).
-
MANUALLY DRIVE THE SCREW COMPLETELY THROUGH THE MELAMINE AND THEN REMOVE IT AND REPEAT FOR EACH HOLE. THERE ARE 9 TOTAL LOCATIONS TO BE TAPPED. BE SURE TO TAP THE HOLES AS STRAIGHT AS POSSIBLE.
-
Attached Documents
