Difficulty
Moderate
Steps
3
Time Required
- Preparing for the Build 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
When you receive your Droplit v2 it will come in a single box with all of the machine components inside.
-
Upon opening the box you will find packaging material to protect the parts. Remove this packaging material.
-
At the top of the box will be the Acrylic Panels, and laser cut melamine. Remove these items from the box.
-
Next you will find another smaller box. This contains the hardware packs and miscellaneous components for building the kit.
-
Do a quick inventory of the parts. Each section of the builds hardware is packaged separately. You will find packing list for each sub-section in their respective bag of hardware.
-
NOTE: The Electronics Parts and Hardware pack have some larger components that have been placed loosely in the box.
-
-
-
The Melamine parts are covered with a special cutting mask that prevents the laser cutting operation from depositing cutting byproducts on the Melamine surface.
-
-
-
Insert wisdom here.
-
Attached Documents
