You're viewing a previously published revision of this guide.  View latest revision

Older
May 04, 2018 - 04:05:33
Aug 10, 2018 - 08:08:18 May 04, 2018 - 04:05:33 May 03, 2018 - 07:05:22 May 03, 2018 - 06:05:00 May 03, 2018 - 06:05:49 May 03, 2018 - 06:05:38 May 03, 2018 - 06:05:52 May 03, 2018 - 06:05:34 May 03, 2018 - 06:05:24 May 03, 2018 - 06:05:51 May 03, 2018 - 06:05:35 May 03, 2018 - 06:05:25 May 03, 2018 - 06:05:47 May 03, 2018 - 06:05:01 May 03, 2018 - 06:05:17 May 03, 2018 - 06:05:05 May 03, 2018 - 06:05:02 May 03, 2018 - 06:05:47 May 03, 2018 - 06:05:40 May 03, 2018 - 06:05:10 May 03, 2018 - 06:05:02 May 03, 2018 - 06:05:46 May 03, 2018 - 06:05:36 May 03, 2018 - 05:05:46 May 03, 2018 - 05:05:27 May 03, 2018 - 05:05:38 May 03, 2018 - 05:05:28 May 03, 2018 - 05:05:50
Newer

DUET Change Stepper Motor Steps/mm

Written By: SeeMeCNC (and 2 other contributors)
  • Comments: 4
  • Favorites: 0
  • Completions: 7

Difficulty

Easy

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

0

  1. 1. Goto Settings

    • 1. Goto Settings

    • 2. Then System Editor

    • 3. Click on config.g

  2. These are the values for 1.8 degree stepper motors otherwise skip to Step 3

    • These are the values for 1.8 degree stepper motors otherwise skip to Step 3

    • Change values of these two lines starting with "M92 ....."

    • 1.8 degree stepper and 20 tooth pulley settings:

    • M92 X80 Y80 Z80

    • M92 E91.0:91.0

    • 1.8 Degree stepper and 16 tooth pulley settings:

    • M92 X100 Y100 Z100

    • M92 E91.0:91.0

  3. These are the values for 0.9 degree stepper motors.

    • These are the values for 0.9 degree stepper motors.

    • Change values of these two lines starting with "M92 ....."

    • 0.9 degree stepper and 20 tooth pulley settings:

    • M92 X160 Y160 Z160

    • M92 E182.0:182.0

    • 0.9 Degree stepper and 16 tooth pulley settings:

    • M92 X200 Y200 Z200

    • M92 E182.0:182.0

Author

with 2 other contributors

SeeMeCNC

Member since: 10/04/2016

562,208 Reputation

16 Guides authored

View Statistics:

Past 24 Hours: 4

Past 7 Days: 4

Past 30 Days: 6

All Time: 2,439