You're viewing a previously published revision of this guide.  View latest revision

Older
May 30, 2018 - 12:05:36
Mar 03, 2025 - 11:03:37 Sep 18, 2018 - 05:09:25 Sep 18, 2018 - 05:09:18 Sep 18, 2018 - 05:09:42 Aug 15, 2018 - 02:08:47 Aug 15, 2018 - 02:08:34 Aug 15, 2018 - 02:08:15 Jul 08, 2018 - 04:07:38 Jun 27, 2018 - 11:06:35 Jun 27, 2018 - 11:06:00 May 30, 2018 - 02:05:05 May 30, 2018 - 01:05:33 May 30, 2018 - 01:05:22 May 30, 2018 - 01:05:03 May 30, 2018 - 01:05:00 May 30, 2018 - 01:05:33 May 30, 2018 - 01:05:25 May 30, 2018 - 01:05:10 May 30, 2018 - 01:05:55 May 30, 2018 - 01:05:20 May 30, 2018 - 01:05:58 May 30, 2018 - 01:05:49 May 30, 2018 - 01:05:33 May 30, 2018 - 01:05:42 May 30, 2018 - 01:05:29 May 30, 2018 - 01:05:12 May 30, 2018 - 01:05:11 May 30, 2018 - 01:05:07 May 30, 2018 - 01:05:11 May 30, 2018 - 01:05:46 May 30, 2018 - 01:05:10 May 30, 2018 - 01:05:48 May 30, 2018 - 01:05:18 May 30, 2018 - 01:05:32 May 30, 2018 - 01:05:47 May 30, 2018 - 01:05:38 May 30, 2018 - 01:05:05 May 30, 2018 - 01:05:05 May 30, 2018 - 01:05:53 May 30, 2018 - 01:05:15 May 30, 2018 - 01:05:08 May 30, 2018 - 01:05:52 May 30, 2018 - 01:05:21 May 30, 2018 - 01:05:46 May 30, 2018 - 01:05:14 May 30, 2018 - 01:05:39 May 30, 2018 - 01:05:57 May 30, 2018 - 01:05:26 May 30, 2018 - 01:05:58 May 30, 2018 - 01:05:31 May 30, 2018 - 01:05:52 May 30, 2018 - 01:05:23 May 30, 2018 - 01:05:00 May 30, 2018 - 01:05:09 May 30, 2018 - 01:05:01 May 30, 2018 - 01:05:45 May 30, 2018 - 01:05:03 May 30, 2018 - 01:05:18 May 30, 2018 - 01:05:55 May 30, 2018 - 01:05:02 May 30, 2018 - 01:05:27 May 30, 2018 - 01:05:04 May 30, 2018 - 01:05:35 May 30, 2018 - 01:05:53 May 30, 2018 - 01:05:26 May 30, 2018 - 01:05:56 May 30, 2018 - 01:05:26 May 30, 2018 - 12:05:06 May 30, 2018 - 12:05:16 May 30, 2018 - 12:05:37 May 30, 2018 - 12:05:26 May 30, 2018 - 12:05:36 May 30, 2018 - 12:05:05 May 30, 2018 - 12:05:31 May 30, 2018 - 12:05:41 May 30, 2018 - 12:05:00 May 30, 2018 - 12:05:37 May 30, 2018 - 12:05:36 May 30, 2018 - 10:05:40 May 30, 2018 - 10:05:39 May 30, 2018 - 10:05:26
Newer

Artemis 300 Touch Screen KIT Installation

Written By: SeeMeCNC (and 5 other contributors)
  • Comments: 8
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • First, click here to read safety information . This safety information may be updated at anytime so occasionally check for updates.

    • NOTE: This guide is intended to be followed online in order to fully utilize the links and documentation found within.

    • Open and inspect the contents of your touch screen kit to ensure you have all the parts listed on the BOM.

    • If you did not purchase the optional enclosure parts add-on, you will need to 3D print the enclosure parts, click the following to download:

    • click to download front cover

    • click to download back enclosure

    • click to download case saddle

    • click to download case clamp

    • Orient the cables as shown. With the alignment tabs from both connectors facing upwards, the red wires should be oriented away from each other.

    • Pass both cables through the mesh loom. You will need to expand the mesh loom as much as possible in small increments to pass the large connectors through.

    • Install the PanelDue control board on the touch screen as shown. Be sure the pins all align and plug in fully.

    • Plug in the two cables as pictured. Make sure the green wire on the molex connector is oriented towards the ribbon cable, and the red wire on the ribbon cable is oriented towards the "Erase" button.

    • Plug in the two cables as pictured. Make sure the green wire on the molex connector is oriented towards the ribbon cable, and the red wire on the ribbon cable is oriented towards the "Erase" button.

    • Both the ribbon cable and the molex cable should only install one direction as they are keyed.

Author

with 5 other contributors

SeeMeCNC

Member since: 10/4/16

562,208 Reputation

16 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 890