Changes to Step #10

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Power On
-[* 9] ***If you are follow a machine build guide, please STOP HERE and return to the guide.*** Otherwise continue this guide.
+[* 9] ***If you are follow a machine build guide, please STOP HERE and return to the guide.*** >>> Otherwise continue this guide to reset or update your firmware.
[* 1] Turn ON the printer and it should sign onto your network.
[* 1] Pull up a browser window and try connecting. The WiFi module will usually be re-assigned the same IP address, however the IP address is not static (sorry no way to set static IP) and your router could assign another number.
-[* 10] If you cannot connect, you will need to follow [guide|82|the configuration guide by clicking here.]
+[* 10] Please visit our website page under menu item SUPPORT > Quick Start if you need to reconfigure your network connection.