Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #23

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Finish Assembly
+[* black] Locate three #4 1/2" screws (the longest ones in the kit) as shown in Pic 1.
+[* black] Line up the plugs on the platform and pushing the PCB onto the platform, the plugs should go into the holes they line up with.
+[* black] Attach the PCB to the platform using the #4, 1/2" screws at all 3 corners.
+[* black] Your hotend assembly is finished and you have a fully asssmbled SE300 Hotend! Congratulations!

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added