Changes to Step #22
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Connect Fans to PCB |
|---|---|
| + | [* 1] Locate the wires coming out of the platform along with the plug at the end of the PCB. |
| + | [* 1] Plug the wires into the plug on the PCB as shown in Pic 2. |
| + | [* 1] Repeat the steps with the remaining 2 plugs so all 3 fans are plugged into the PCB as shown in Pic 3. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added