Changes to Step #18
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Install Blower Fans |
|---|---|
| + | [* 1] Insert the wire for the fan through the hole in the platform as shown in Pic 1. There is an arrow on the bottom of the fan showing the direction of airflow, this arrow should be aimed toward the center of the platform. |
| + | [* 1] Using 2 of the supplied #4, 3/8" screws (the short ones from the kit) attach the fan to the platform. DO NOT over tighten these as they can strip out the fan. Only tighten them snug. |
| + | [* 1] Repeat this process for the remaining 2 fans so all 3 fans are attached to the platform . |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added