Changes to Step #10
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Installling Heat Sink Cooler |
|---|---|
| + | [* 1] Locate the 25mm fan and fan shroud |
| + | [* 1] Insert the fan into the fan shroud as shown in Pic 2. The label on the fan should face the curved parts of the fan shroud and the wires should be at the top as shown. |
| + | [* 1] You will use this fan shroud with fan and the hotend for the next step. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added