Changes to Step #7
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Attach Heat Break |
|---|---|
| + | [* 1] Locate the heat sink and heat break from the parts you just dissembled in the previous step. |
| + | [* 1] Screw the heat break into the heat sink into the side with multiple closer fins as shown in pic 2. |
| + | [* 1] The heat break has 2 flats on it used to tighten it. Use a 5/16 wrench or an adjustable wrench and securely tighten the heat break to the heat sink. |
Image 1
No previous image
Added
Image 2
No previous image
Added