Changes to Step #4
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Attach Wires to Cartridge |
|---|---|
| + | [* 1] Locate the two red insulated wires in the kit and strip off the ends as shown in the first picture approximately as long as half the crimp. |
| + | [* 1] Insert the wires into the crimps and as in the step before use your crimp tool or pliers to crush the other half of the crimp attaching the wires to the crimp securely. |
Image 1
No previous image
Added
Image 2
No previous image
Added