Changes to Step #7

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] The KK Connectors
[* 1] Insert the KK connectors as shown, making sure that the small tab on the metal wire crimp is aligned with the tab hole on the plastic connector.
[* 9] Again, if inserted properly, you should hear and feel a satisfying click as the tab seats. Give the wire a gently tug to make sure it's seated properly.
-[* 1] Repeat for the remaining KK connectors, ***carefully*** following the PDF wiring diagram from earlier.
+[* 1] Repeat for the remaining KK connectors, ***carefully*** following the wiring diagram from earlier.