Changes to Step #4

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] The 4-position SL / 2-position Push-In Wire Bundle
[* 1] Insert the two white wires in the 4 pin SL connector just as you did for the 10 pin SL connector in Step 2.
[* 1] Make sure an adequate amount of the PVC has been stripped from the red and black 20awg wire, and insert into the 2 pin push-in wire terminal as shown.
-[* 9] Use the PDF wire diagram as reference when needed
+[* 9] Remember to use the wire diagram from earlier as reference when needed