Changes to Step #4
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] The 4-position SL / 2-position Push-In Wire Bundle |
|---|---|
| + | [* 1] Insert the two white wires in the 4 pin SL connector just as you did for the 10 pin SL connector in Step 2. |
| + | [* 1] Make sure an adequate amount of the PVC has been stripped from the red and black 20awg wire, and insert into the 2 pin push-in wire terminal as shown. |
| + | [* 9] Use the PDF wire diagram as reference when needed |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added