Changes to Step #2

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] The 10-position SL Connector
[* 1] Begin inserting the wires into the black SL 10 position housing.
[* 9] Be sure the small tab on the metal crimp terminal is facing the same direction as the square holes in the connector. If inserted properly, you should hear and feel a satisfying click as the tab seats. Give the wire a gently tug to make sure it's seated properly.
-[* 1] Repeat for the remainder of the wires, using the PDF from earlier as a guide.
+[* 1] Repeat for the remainder of the wires, using the diagram from earlier as a guide.