Changes to Step #2
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] The 10-position SL Connector |
|---|---|
| + | [* 1] Begin inserting the wires into the black SL 10 position housing. |
| + | [* 9] Be sure the small tab on the metal crimp terminal is facing the same direction as the square holes in the connector. If inserted properly, you should hear and feel a satisfying click as the tab seats. Give the wire a gently tug to make sure it's seated properly. |
| + | [* 1] Repeat for the remainder of the wires, using the diagram from earlier as a guide. |
Image 1
No previous image
Added
Image 2
No previous image
Added