Skip to main content

Changes to this Step

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Update Your Firmware
+[* 9] If you purchased a fully assembled RTP (ready to print) machine, please skip this step.
[* 1] Go to the "G-Code Console" page.
[* 1] In the text field, type in ***M997 S0:1*** . This command manually triggers a firmware update to the latest version.
[* 1] If done successfully, you should see an attention box telling you the connection has been terminated while updating the firmware.
[* 1] Wait a minute or so, then reconnect to the printer using the blue "Connect" button at the top left of the window.