Skip to main content

Changes to this Step

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Initial Setup
[* 1] Check that your hot end probe is working properly. Tap upwards on the bottom of the nozzle and you should see a blue LED flash on the hot end. If you don't, check your whip and probe wiring. If your wiring looks correct, contact support.
[* 1] Open a web browser (we recommend Chrome) and follow this link: https://github.com/seemecnc/RostockMaxV3.2
-[* 1] Click the green "Clone or Download button on the right and click "Download ZIP"
+[* 1] Click the green "Clone or Download" button on the right and click "Download ZIP"
[* 1] Remove the SD card from your Rostock Max V3.2 and insert it into your computer. Delete all the files from the SD card.
[* 9] I repeat, delete ALL the files from the SD card!
[* 1] Extract the files from the ZIP folder you downloaded form github, and copy ALL of the contents from the "SD" folder to the SD card. Eject, and insert the SD card back into your printer.
[* 1] You should now be able to restart and reconnect to your printer.