Skip to main content

Changes to this Step

Edit by SeeMeCNC

Edit approved by SeeMeCNC

Before
After
Unchanged

Step Lines

[title] Download Duet Driver Files
[* 1] If you are running windows, [https://github.com/dc42/RepRapFirmware/raw/dev/Driver/DuetDriverFiles.zip|click here to download the Duet Wifi Drivers.] If you are running Mac or Linux, you won't need them - skip this step. Unzip the file and save the drivers somewhere you'll be able to find them. On windows 10, just double click the "duet.inf" file and in will install the driver. On windows 7, you'll need to find the duet in Device Manager and click update driver.
[* 1] If you don't already have a program installed to send commands to a 3D printer, we recommend YAT (Download here: https://sourceforge.net/projects/y-a-terminal/). Once it's downloaded you shouldn't need to change any settings, just connect to the printer.
[* 9] If you are using Simplify 3D, Pronterface, or MatterControl to connect to the printer, make sure it's not converting all your text to uppercase when you're setting up your wifi in the next step.
-[* 10] You can find more information on the Duet wiki. All of the Rostock Max V3.2's are currently shipped with 1.19 firmware. https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi