Changes to Step #64
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Install Acrylic Covers | |
| [* 1] Remove the paper backing from both sides of the acrylic panels. | |
| [* 1] If you look at the injection molded base sides you will see the "stop" boss for the acrylic covers. Insert one side of the panel into the chosen corner, and then flex the panel into place. | |
| - | [* 1] Repeat for the remaining corner covers. |
| + | [* 1] Repeat for all the remaining corner covers. |
| + | [* 1] Install the top hatch as shown. |