Changes to Step #49

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] The Fuse Panel
-[* 1] Insert wisdom here.
+[* 1] Install the fuse holders as shown.
+[* 1] Solder the 20awg red wire from the hotend and the extra short length of 18awg red wire in your kit to the HOT END 5A fuse holder location, indicated by the COMIC SANS laser etched into the wood.
+[* 1] Solder the 12awg black wire from the Y tower and the extra short length of 12awg black wire in your kit to the HOT END 15A fuse holder location, indicated by the typeface that's been out of style since the 90s.