Skip to main content

Changes to Step #25

Edit by SeeMeCNC

Edit approved by SeeMeCNC


Step Lines

-[* black] Insert wisdom here.
+[title] Installing Carriages
+[* black] We will now install the injection molded carriages on the three towers. They will install on the towers with the ball joints facing the inside.
+[* black] To install the carriages pass the wires from the top of the TSLOT through the center of the carriage.
+[* icon_caution] Pushing the carriage down too hard too fast can damage the bearing covers on the carriages. Please perform this operation slowly and carefully.
+[* black] Lower the carriage down to the top of the TSLOT and then slowly push it down onto the TSLOT.