Changes to Step #30
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| [title] Install Remaining Board Mounts | |
| - | [* 1] Install the remaining board mounts, but DO NOT fully tighten. |
| - | [* 1] Rotate the board mounts out of the way and insert the Duet WiFi board into the front mounts. |
| - | [* 1] Pivot the rear mounts into place and tighten the #4 screws. |
| - | [* 1] You can twist the rear mounts more / less to adjust the hold on the Duet WiFi board. |
| + | [* 1] Install the Duet as shown. |