Changes to Step #28

Edit by Caleb Fairres —

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

[title] Installing Duet WiFi Mounts
-[* 1] The Duet WiFi board mounts to the upper assembly using 3D Printed mounts. They will be secured to the upper assembly base plate with (4) #4 sheet metal screws in the locations shown.
-[* 1] There are (2) Left and (2) Right pieces for mounting the board.
+[* 1] The Duet WiFi board mounts to the upper assembly using the laser cut mounts pictured. They will be secured to the upper assembly base plate with four 1" 6/32 Pan head screws and nylon lock nuts in the locations shown.
+[* 1] Install the board mounts so that the angled ledge hangs over the side panel. They should only install one direction.